Okotherm® CIC P-OS Fire Resistant Cable 600V Instrumentation Cable-Aluminum Sheath Type MC

A Nickel or Tin Coated Copper Conductors

B Okotherm (Silicone) Thermoset Insulation

C Fiberglass Braid - Coded per ICEA

D Nickel or Tin Coated Copper Drain Wire

E Fiberglass Fillers, as needed

F Aluminum - Mylar Shield Tape

G Flame Retardant Binder Tape

H Impervious, Continuous, Corrugated, Aluminum C-L-X Sheath

J Black Okoseal Jacket

Cable Description
Tin or nickel coated copper conductors, Okotherm CIC fire resistant thermoset silicone insulation, color or number coded fiber glass braid, cabled conductors, tin or nickel coated drain wire, aluminum-polyester shield tape, fire resistant cable tape, aluminum CLX sheath, Okoseal (PVC) jacket.

Conductors: Tin or nickel coated copper

Insulation: Okotherm Thermoset Silicone

Braid: Fiber Glass Braid

Color Code: ICEA S-73-532, Method 7

Assembly: Pairs or triads assembled with left hand lay. Fiberglass fillers included where required to provide a round cable.

Cable Shield: Aluminum/polyester tape over- lapped to provide 100% coverage and a 7-strand tin or nickel coated copper drain wire, same size as conductors.

Armor-CLX: Continuously Welded and Corrugated Aluminum

Outer Jacket: Black PVC

Applicable Industry Standards:
— UL 1569, 1309, & 2250 — ICEA S-73-532 (NEMA WC 57) — ASTM B-33 & B-355

Flame Tests: IEC 60331, ICEA T-29-520, IEEE 1202

Applications
Okotherm CIC 600 volt instrumentation cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC nickel coated copper cables maintain circuit integrity based on qualification to the IEC standard 60331 for all temperatures and times up to and including 1000°C for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electrically insulating ceramic-like ash that is capable of maintaining the operating voltage.
Okotherm CIC CLX Type MC cables with the impervious, continuous aluminum corrugated sheath are recommended as an alternative to a wire conduit system. These cables may be installed indoors or outdoors, in wet or dry locations, as open runs of cable secured to supports not more than six feet apart, in cable tray, as an aerial cable on a messenger, in any approved raceway, direct burial, or encased in concrete. They are also approved for use in Class I & II, Division 2, Class III, Division 1 and 2 and Class I, Zones 1 & 2 hazardous locations per NEC Articles 501, 502, 503, and 505. They are listed by the American Bureau of Shipping (ABS) as CWCMC-CLXM and by UL as marine shipboard cable.
The overall shield eliminates most of the static interference from the electric field radiated by power cables and other electrical equipment.
Okotherm CIC 600 volt instrumentation cables should be considered on circuits designed for fire detection and suppression, alarms, communication, circuits requiring redundancy and personnel egress.

Product Features

UL Listed as Type MC cable and Marine Shipboard Cable, E38916 and E137931.
UL Listed for cable tray use, direct burial and sunlight resistant.
Passes the IEEE 383-1974 and IEEE 1202 vertical tray flame tests.
Passes the 210,000 BTU ICEA T-29-520 Vertical Tray Flame Test.
Complete pre-packaged, factory-tested wiring system.
Individual pairs or triads are numbered and color coded for simplified hook-up.
C-L-X cables are quality control inspected to meet or exceed applicable UL standards.
90°C continuous operating temperature in all types of installations.
130°C emergency rating.
250°C short circuit rating.
Good EMI shielding characteristics.
Impervious, continuous metallic sheath excludes moisture, gases and liquids.
Reduced sealing fitting requirements in Class I, Division 2 or Zone 2 hazardous locations (NEC Section 501.5(E) or 505.15(C).
Lower installed system cost than conduit or EMT systems.
Provides excellent grounding safety.
Excellent compression and impact resistance.
Continuous long lengths.
Minimum installation temperature of -40°C or °F.
American Bureau of Shipping listed as CWCMC Type MC.
Conforms to applicable requirements of IEEE 1580.

1-Catalog Number
2-Conductor Size (AWG)
3-Number of Pairs
4-Number of Triads
5-C-L-X O.D. - inches
6-C-L-X O.D. - mm

7-Jacket Thickness-mils
8-Nominal Cable O.D. - inches
9-Nominal Cable O.D. - mm
10-Cross-Sectional Area † (sq in)
11-Approx Net Weight (lbs/1000’)
12-Approx Ship Weight (lbs/1000’)

Tin Coated Copper Conductors, IEC Rating: 750°C for 90 minutes

1	2	3	4	5	6	7	8	9	10	11	12
567-16-3301 567-16-3302 567-16-3043 567-16-3308	18(7X)	1 2 4 8		0.53 0.89 0.89 1.11	13.5 22.6 22.6 28.2	50 50 50 50	0.64 1.00 1.00 1.22	16.3 25.4 25.4 31.0	0.32 0.79 0.79 1.17	152 261 327 521	191 341 407 611
567-16-3312 567-16-3316 567-16-3324 567-16-3336		12 16 24 36		1.34 1.51 1.74 2.40	34.0 38.4 44.2 61.0	50 60 60 75	1.45 1.65 1.87 2.56	36.8 41.9 47.5 65.0	1.65 2.14 2.75 5.15	706 913 1285 2014	849 1056 1472 2399
567-16-3701 567-16-3704 567-16-3708 567-16-3712			1 4 8 12	0.58 1.06 1.37 1.64	14.7 26.9 34.8 41.7	50 50 50 60	0.69 1.17 1.48 1.78	17.5 29.7 37.6 45.2	0.37 1.08 1.72 2.49	178 443 714 1011	217 523 857 1175
567-16-3716 567-16-3724			16 24	1.83 2.78	46.5 70.6	60 75	1.96 2.44	49.8 62.0	3.02 4.68	1307 1969	1494 2304
567-16-3401 567-16-3402 567-16-3404 567-16-3408	16(7X)	1 2 4 8		0.58 0.93 0.93 1.15	14.7 23.6 23.6 29.2	50 50 50 50	0.69 1.04 1.04 1.26	17.5 26.4 26.4 32.0	0.37 0.85 0.85 1.25	173 291 375 605	212 371 455 695
567-16-3412 567-16-3416 567-16-3424 567-16-3436		12 16 24 36		1.42 1.64 1.96 2.58	36.1 41.7 49.8 65.5	50 60 60 75	1.53 1.78 2.09 2.74	38.9 45.2 53.1 69.6	1.84 2.49 3.43 5.90	835 1091 1562 2396	978 1255 1847 2867
567-16-3801 567-16-3804 567-16-3808 567-16-3812			1 4 8 12	0.58 1.12 1.47 1.78	14.7 28.4 37.3 45.2	50 50 50 60	0.69 1.22 1.58 1.91	17.5 31.0 40.1 48.5	0.37 1.17 1.96 2.87	195 510 844 1256	234 600 987 1443
567-16-3816 567-16-3824			16 24	1.96 2.45	49.8 62.2	60 75	2.09 2.61	53.1 66.3	343 5.35	1560 2351	1845 2736

Nickel Coated Copper Conductors, IEC Rating: 1000°C for 3 hours

1	2	3	4	5	6	7	8	9	10	11	12
567-17-3301 567-17-3303 567-17-3304 567-17-3308	18(7X)	1 2 4 8		0.53 0.89 0.89 1.11	13.5 22.6 22.6 28.2	50 50 50 50	0.64 1.00 1.00 1.22	17.5 25.4 25.4 31.0	0.32 0.79 0.79 1.17	152 261 327 521	191 341 407 611
567-17-3312 567-17-3316 567-17-3324 567-17-3336		12 16 24 36		1.34 1.51 1.74 2.40	34.0 38.4 42.2 61.0	50 60 60 75	1.45 1.65 1.87 2.56	36.6 41.9 47.5 65.0	1.65 2.14 2.75 5.15	706 913 1285 2014	849 1056 1472 2399
567-17-3701 567-17-3704 567-17-3708 567-17-3712			1 4 8 12	0.58 1.06 1.37 1.64	14.7 26.9 34.8 41.7	50 50 50 60	0.69 1.17 1.48 1.78	17.5 29.7 37.6 45.2	0.37 1.08 1.72 2.49	178 443 714 1011	217 523 857 1175
567-17-3716 567-17-3724			16 24	1.83 2.78	46.5 70.6	60 75	1.96 2.44	49.8 62.0	3.02 4.68	1307 1969	1494 2304
567-17-3401 567-17-3402 567-17-3404 567-17-3408	16(7X)	1 2 4 8		0.58 0.93 0.93 1.15	14.7 23.6 23.6 29.2	50 50 50 50	0.69 1.04 1.04 1.26	17.5 26.4 26.4 32.0	0.37 0.85 0.85 1.25	173 291 375 605	212 371 455 695
567-17-3412 567-17-3416 567-17-3424 567-17-3436		12 16 24 36		1.42 1.64 1.96 2.58	36.1 41.7 49.8 65.5	50 60 60 75	1.53 1.78 2.09 2.74	38.9 45.2 53.1 69.6	1.84 2.49 3.43 5.90	835 1091 1562 2396	978 1255 1847 2867
567-17-3801 567-17-3804 567-17-3808 567-17-3812			1 4 8 12	0.58 1.12 1.47 1.78	14.7 28.4 37.3 45.2	50 50 50 60	0.69 1.22 1.58 1.91	17.5 31.0 40.1 48.5	0.37 1.17 1.96 2.87	195 510 844 1256	234 600 987 1443
567-17-3816 567-17-3824			16 24	1.96 2.45	49.8 62.2	60 75	2.09 2.61	53.1 66.3	3.43 5.35	1560 2351	1845 2736


ELECTRICAL SPECIFICATIONS 
Per UL Standard 44 
Conductor Resistance, nominal (1 Pr)..ohms/1000 ft. @25°C 
........................................................................T.Cu...Ni. Cu 
       18 AWG........................................................... 7.05........9.39 
      16 AWG............................................................4.44........5.89 
Insulation Test Voltage (spark test)..................7500 Volts ac 
Dielectric Test Voltage..............................3000 V ac for 5 min. 
Insulation Resistance Constant @60°F minimum                     
      (natural material typical value). ... 4000 Megohms-1000 ft. 
Loop Resistance, nominal (1 Pr)..........ohms-1000 ft @ 25°C    
.................................................................................T.Cu...Ni. Cu 
     18 AWG.................................................................14.1.....18.8 
                 16 AWG..................................................................8.9.....11.8

† Cross-sectional area for calculation of cable tray fill in accordance with NEC Section 392.9.