A Coated, Stranded Copper Conductors
B Okonite-FMR Insulation
C Marker Strip
D Extruded Fill and Belt E 5
mil Longitudinal Corrugated Coated Copper Shield F Okolon Jacket
Insulation
Okonite-FMR is Okonites trade name for its heat, moisture, flame and chemically
resistant, mechanically rugged ethylene-propylene insulation compound.
It is flame retardant and will pass both the 70,000 BTU/hour and 210,000
BTU/hour tray flame test. Its physical properties and flame retardancy
permit its use without a jacket on the single conductors thus providing
a substantially smaller overall diameter control cable.
The properties of Okonite-FMR insulation substantially enhance the well
known features of ethylene propylene rubber insulations.
Nuclear qualified Okonite/FMR cables that meet IEEE Standard - 383 and
LOCA criteria are available on special order.
Shield
The shield system consists of a 5 mil copper tape which is longitudinally applied over the extruded belt and fill. The Longitudinal Corrugated
Shield (LCS) maintains uniformly low resistance and a low reactance path for optimum shielding against external high frequency interference.
Overall Jacket
The Okolon jacket is a vulcanized chlorosulfonated polyethylene compound. This combination construction assures circuit security because of
its high mechanical strength and excellent resistance to moisture, ozone, oil and most chemicals.
Applications
Okonite-FMR Control Cables are recommended for use in either power generating
plants and in substations; designed especially for critical circuits where
continuity of service is of prime importance. This premium quality control
cable is recommended for wet or dry, ac or dc service at conductor temperatures
to 90°C where electrostatic shielding is required. They may be installed in conduits, ducts, cable troughs, trays,
messenger supported, or directly buried in the earth.
Specifications
Conductors: Coated copper per ASTM B-33, Class B stranded per ASTM B-8.
Insulation: Okonite-FMR meets or exceeds the electrical and physical requirements
of ICEA S-75-532.
Color Coding: Base colors and tracers per ICEA Method 1 Table E-1. Sequence
shown bellow.
Assembly: Conductors cabled using flame and moisture resistant fillers.
Overall Jacket: The Okolon compound meets or exceeds the requirements of
ICEA S-75-532
Product Features
- Flame retardant - passes the IEEE 383 and 1202 flame test requirements. Also passes the ICEA T-29-520 (210,000 BTU/hr) flame test.
- Quality Assurance traceability available on special order.
- 90°C rated control cable, factory assembled for indoor or outdoor installation
in cable trays, in raceways, direct burial in the earth, or supported by
messenger wire.
- Mechanically rugged.
- Flexible, easy to install and terminate.
- Color coded conductors.
- Resistant to water, oil and most chemicals.
- Thermally stable at elevated temperatures.
- High insulation resistance, even at elevated temperatures.
- Small diameter, light weight.
|