X-OleneŽ Type RHH or RHW-2, or USE-2 600V Power and Control Copper Conductor/90°C Wet or Dry Sunlight resistant

	Product Data Section 3: Sheet 4
X-Olene^Ž Type RHH or RHW-2, or USE-2 600V Power and Control Copper Conductor/90°C Wet or Dry Sunlight Resistant - For Direct Burial ^{^{^*}}

A Bare, Solid or Stranded Copper Conductor

B X-Olene Insulation

Insulation

X-Olene is Okonite's trade name for its chemically cross-linked polyethylene insulating compound with outstanding electrical and physical properties. Its excellent chemical physical resistance permits X-Olene's use in areas exposed to alcohol, ketones and dilute acids and bases, without additional coverings.

Applications
X-Olene Type RHH or RHW-2 or USE-2 600 Volt Power and Control Cables are recommended for general low voltage power and control applications. Where the National Electrical Code applies, Type RHH or RHW-2 or USE-2 may be used up to 90°C in dry or wet locations. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, directly buried in the earth, or lashed to a messenger for aerial installation.

Specifications
Conductor: Bare, solid or stranded copper per ASTM B-3 or B-8.

Insulation: Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards 44 and 854.

Listed by Underwriters Laboratories, Inc. as Type RHH or RHW-2 or USE-2.

CSA* rated RW90.

* On Special Request.

Product Features

Outstanding heat resistance.
Rated 90°C wet or dry.
Mechanically rugged.
Stable electrical properties.
Low moisture absorption.
Highly resistant to weather and most chemicals.
UL Listed.

1-Catalog Number
2-Conductor Size - AWG or kcmil
3-Number of Strands
4-Insulation Thickness - mils
5-Insulation Thickness - mm
6-Approx.O.D. - Inches

07-Approx.O.D. - mm
08-Approx. Net Weight lbs./1000'
09-Approx. Ship Weight lbs./1000'
10-90°C Wet(1) NEC Ampacity
11-75°C Wet(1) NEC Ampacity
12-ICEA Ampacity(2)

1	2	3	4	5	6	7	8	9	10	11	12
112-32-3061 112-32-3071 112-32-3101	14 14 12	1 7 1	45 45 45	1.14 1.14 1.14	.16 .17 .19	4.06 4.32 4.57	21 25 29	23 27 31	15 15 20	15 15 20	24 24 30
112-32-3111 112-32-3141 112-32-3151	12 10 10	7 1 7	45 45 45	1.14 1.14 1.14	.20 .20 .21	4.83 5.08 5.33	34 43 45	36 45 47	20 30 30	20 30 30	30 42 42
112-32-3231 112-32-3271 112-32-3311	8 6 4	7 7 7	60 60 60	1.52 1.52 1.52	.27 .31 .35	6.86 7.87 9.14	71 105 158	78 115 168	55 75 95	30 65 85	55 75 97
112-32-3371 112-32-3401 112-32-3421	2 1 1/0	7 19 19	60 80 80	1.52 2.03 2.03	.41 .49 .53	10.67 12.45 13.46	240 312 384	254 328 414	130 150 170	115 130 150	130 156 179
112-32-3441 112-32-3461 112-32-3481	2/0 3/0 4/0	19 19 19	80 80 80	2.03 2.03 2.03	.58 .63 .68	14.73 16.00 17.53	475 588 730	507 631 773	195 225 260	175 200 230	204 242 278
112-32-3511 112-32-3521 112-32-3541	250 300 350	37 37 37	95 95 95	2.41 2.41 2.41	.76 .81 .86	19.56 20.83 22.10	872 1032 1195	912 1107 1270	290 320 350	255 285 310	317 351 384
112-32-3581 112-32-3641 112-32-3701	500 750 1000	37 61 61	95 110 110	2.41 2.79 2.79	.92 1.20 1.35	25.40 31.00 34.80	1620 2499 3292	1728 2644 3437	430 535 615	380 475 545	477 598 689

Minimum Manufacturing Quantity: 50,000 ft.

To order a color other than black, change the last digit of the catalog number as follows:
White	2
Red	3
Green	4
Orange	5
Blue	6
Yellow	7
Example: To order #14/SOL - Red, the catalog number would be 112-32-3063.

Ampacities

(1) Ampacities are based on Table 310-16 of the National Electrical Code for these 90°C rated conductors at an ambient temperature of 30°C. The 75°C wet column is provided for additional information.

The ampacities shown apply to open runs of cable, installation in any approved raceway, direct burial in the earth, or as aerial cable on a messenger. Derating for more than three current carrying conductors within a raceway is in accordance with Note 8 to NEC Tables 310-16 through 310-19.

(2) Based on three (3) conductors in a single enclosed or exposed conduit. Capacities based on 40°C air ambient using ICEA methods. For 30°C ambient multiply values by 1.10; for 50°C multiply by .90. For other ambients or installation conditions refer to Engineering Data Book EHB-90.

The ampacities shown also apply to cables installed in cable tray in accordance with NEC Section 318-11.

C/01050304

BACK TO DATA SHEET INDEX