Okonite X-Olene® -Okoseal® Type TC Cable 600 Volt Power and Control Tray Cable Multiple Copper Conductors, 90°C Wet or Dry With or Without Grounding Conductor For Cable Tray Use

A Stranded Copper Conductors

B X-Olene Insulation

C Fillers, as required

D Black Okoseal Jacket

Insulation
X-Olene^® is Okonite's trade name for its cross-linked polyethylene, with high dielectric strength.

Color Coding
Conductors are color coded using base colors and tracers in accordance with the Conductor Identification Table on the back of this Data Sheet.

Jacket
The Okoseal (PVC) jacket supplied with this cable is mechanically rugged and has excellent resistance to acids and most chemicals.

Applications
X-Olene Okoseal Type TC tray cable is permitted for use on power, lighting, control, and signal circuits; indoors or outdoors; in cable trays, raceways, direct burial in the ground, or where supported in outdoor locations by a messenger wire; for Class 1 circuits as permitted in Article 725 of the NEC; and in cable trays in Class I, Division 2 hazardous locations in industrial establishments where the conditions of maintenance and supervision assure that only qualified persons will service the installation

Specifications
Conductors: Bare, soft annealed copper per ASTM B-3, Class B stranded per ASTM B-8.

Insulation: X-Olene insulation per UL 1581, listed as XHHW-2.

Color Coding: Base colors and tracers as shown on reverse of Data Sheet.

Assembly: Conductors cabled in accordance with UL 1277 using fillers and tape, as needed.

Overall Jacket: Complies with UL 1277. The Okoseal compound meets or exceeds the requirements of UL 1581.

Cable passes the Vertical Tray Flame Test requirements of UL 1277 for Type TC Power and Control Tray Cable.

UL Listed as Type TC cable with a sunlight resistant jacket and for direct burial.

Product Features
For direct burial. Sunlight resistant. Insulated conductors are UL Listed Type XHHW-2. UL Listed for cable tray use. 90°C continuous rating in wet or dry locations; 130°C emergency overload rating; 250°C short circuit rating. X-Olene Okoseal Type TC cables are quality control inspected to meet or exceed applicable industry standards. Resistant to moisture and most chemical atmospheres. Thermal stability at elevated temperatures. Easy to install and terminate. Mechanically rugged. High dielectric strength. Small diameter, lightweight.

1	2	3	4	5	6	7	8	9	10	11	12	13
202-31-3502	14(7X) (2.08mm²)	2	30 (0.76mm)	45	1.14	0.37	9.4	0.11	84	95	15	15
202-31-3503		3		45	1.14	0.39	9.9	0.13	100	123	15	15
202-31-3504		4		45	1.14	0.43	10.9	0.15	122	145	15	15
202-31-3505		5		45	1.14	0.46	11.7	0.17	144	167	15	15
202-31-3507		7		45	1.14	0.50	12.7	0.20	182	205	15	14
202-31-3509		9		60	1.52	0.62	15.7	0.30	254	278	15	14
202-31-3512		12		60	1.52	0.69	17.6	0.38	306	338	12	10
202-31-3519		19		60	1.52	0.80	20.3	0.53	446	485	12	10
202-31-3537		37		80	2.03	1.11	28.2	1.02	856	936	10	8
202-31-3602	12(7X) (3.31mm²)	2	30 (0.76mm)	45	1.14	0.41	10.4	0.13	109	132	20	20
202-31-3603		3		45	1.14	0.43	10.9	0.15	133	156	20	20
202-31-3604		4		45	1.14	0.47	11.9	0.17	164	187	20	20
202-31-3605		5		45	1.14	0.51	13.0	0.21	196	219	20	20
202-31-3607		7		60	1.52	0.59	15.0	0.27	269	293	20	17
202-31-3609		9		60	1.52	0.68	17.3	0.37	344	376	20	17
202-31-3612		12		60	1.52	0.77	19.6	0.48	425	464	15	12
202-31-3619		19		60	1.52	0.94	23.9	0.72	660	715	15	12
202-31-3637		37		80	2.03	1.24	31.5	1.25	1200	1290	12	10
202-31-3702	10(7X) (5.26mm²)	2	30 (0.76mm)	45	1.14	0.45	11.4	0.17	148	171	30	30
202-31-3703		3		45	1.14	0.48	12.2	0.18	183	206	30	30
202-31-3704		4		60	1.52	0.56	14.2	0.26	246	270	30	28
202-31-3705		5		60	1.52	0.61	15.5	0.30	294	318	30	28
202-31-3707		7		60	1.52	0.66	16.8	0.35	378	410	28	24
202-31-3709		9		60	1.52	0.77	19.6	0.48	485	524	28	24
202-31-3712		12		80	2.03	0.91	23.1	0.66	643	698	20	17

Authorized Stock Item - Available from our Service Centers.

Minimum Manufacturing Quantity for non-stock items: sizes #14-6 AWG - 5000'; sizes 4-1000 kcmil - 3000'.

Equipment Grounding Conductor: Any conductor in these cables may be permanently reidentified during installation as the equipment grounding conductor in accordance with Section 250-57(b) of the NEC.

Ą Cross-sectional area for calculation of cable tray fill in accordance with NEC Section 318-9.

(1) Ampacities
Ampacities are based on 310-16 of the National Electrical Code for XHHW-2 conductors rated 90°C, in a multi-conductor cable, at an ambient temperature of 30°C (86°F). Derating for more than three current carrying conductors within the cable is in accordance with Notes 8 and 10 to NEC Tables 310-16 through 310-19. When installed in Class 1 remote-control or signaling circuits in accordance with NEC Section 725-19, where the conductors do not carry continuous load, no derating is required.

The ampacities shown apply to cables installed in cable tray in accordance with NEC Section 318-11, installation in any approved raceway, or direct buried in the earth.

1	2	3	4	5	6	7	8	9	10	11	12	13	14
112-31-3734	8(7X) (8.36mm²)	3	45	-	60	1.52	0.65	16.5	0.35	323	355	55	50
112-31-3735		3		10	60	1.52	0.65	16.5	0.35	356	388	55	50
112-31-3736		4		-	60	1.52	0.71	18.0	0.42	402	434	44	40
112-31-3737		4		10	60	1.52	0.74	18.8	0.42	457	496	44	40
112-31-3746	6(7X) (13.3mm²)	3	45	-	60	1.52	0.73	18.5	0.44	403	442	75	65
112-31-3747		3		8	60	1.52	0.75	19.1	0.44	423	562	75	65
112-31-3748		4		-	60	1.52	0.80	20.3	0.53	562	601	60	52
112-31-3749		4		8	60	1.52	0.88	22.4	0.53	677	732	60	52
112-31-3758	4(7X) (31.2mm²)	3	45	-	60	1.52	0.83	21.1	0.62	636	675	95	85
112-31-3759		3		8	60	1.52	0.83	21.1	0.62	693	732	95	85
112-31-3760		4		-	80	2.03	0.96	24.4	0.74	848	903	76	68
112-31-3761		4		8	80	2.03	1.00	25.4	0.74	945	1009	76	68
112-31-3764	2(7X) (33.6mm²)	3	45	-	80	2.03	1.00	25.4	0.81	973	1037	130	115
112-31-3765		3		6	80	2.03	1.00	25.4	0.81	1053	1117	130	115
112-31-3766		4		-	80	2.03	1.10	27.9	0.98	1229	1296	104	92
112-31-3767		4		6	80	2.03	1.02	25.9	0.98	1335	1390	104	92
112-31-3770	1(19X) (42.4mm²)	3	55	-	80	2.03	1.13	28.7	1.02	1226	1306	150	130
112-31-3771		3		6	80	2.03	1.13	28.7	1.02	1307	1387	150	130
112-31-3772		4		-	80	2.03	1.25	31.8	1.24	1551	1651	120	104
112-31-3773		4		6	80	2.03	1.25	31.8	1.24	1631	1731	120	104
112-31-3776	1/0(19X) (53.5mm²)	3	55	-	80	2.03	1.22	31.0	1.18	1486	1576	170	150
112-31-3777		3		6	80	2.03	1.22	31.0	1.18	1566	1666	170	150
112-31-3778		4		-	80	2.03	1.35	34.3	1.44	1886	1986	136	120
112-31-3779		4		6	80	2.03	1.35	34.3	1.44	1966	2066	136	120
112-31-3780	2/0(19X) (67.4mm²)	3	55	-	80	2.03	1.32	33.6	1.37	1808	1908	195	175
112-31-3781		3		6	80	2.03	1.32	33.6	1.37	1888	1988	195	175
112-31-3782		4		-	80	2.03	1.45	36.8	1.67	2298	2414	156	140
112-31-3783		4		6	80	2.03	1.45	36.8	1.67	2378	2494	156	140
112-31-3784	4/0(19X) (107mm²)	3	55	-	80	2.03	1.55	39.4	1.90	2708	2851	260	230
112-31-3785		3		4	80	2.03	1.55	39.4	1.90	2836	2979	260	230
112-31-3786		4		-	110	2.79	1.77	45.0	2.49	3569	3803	208	184
112-31-3787		4		4	110	2.79	1.77	45.0	2.49	3697	3931	208	184
112-31-3788	250(37X) (127mm²)	3	65	-	110	2.79	1.75	44.5	2.44	3311	3545	290	255
112-31-3789		3		4	110	2.79	1.75	44.5	2.44	3454	3688	290	255
112-31-3790		4		-	110	2.79	1.75	44.5	2.97	3438	3672	232	185
112-31-3791		4		4	110	2.79	1.94	49.3	2.97	4350	4616	232	185
112-31-3792	350(37X) (177mm²)	3	65	-	110	2.79	1.98	50.3	3.10	4461	4717	350	310
112-31-3793		3		3	110	2.79	1.98	50.3	3.10	4622	4969	350	310
112-31-3794		4		-	110	2.79	2.19	55.6	3.78	5706	6106	280	248
112-31-3795		4		3	110	2.79	2.19	55.6	3.78	5867	6267	280	248
112-31-3796	500(37X) (253mm²)	3	65	-	110	2.79	2.26	57.4	4.03	6132	6691	430	380
112-31-3797		3		2	110	2.79	2.26	57.4	4.03	6336	6895	430	380
112-31-3798		4		-	110	2.79	2.50	63.5	4.94	7871	8430	344	304
112-31-3799		4		2	110	2.79	2.50	63.5	4.94	8075	8702	344	304
112-31-3800	750(61X) (380mm²)	3	80	-	110	2.79	2.71	68.8	5.80	9036	9746	535	475
112-31-3801		3		1	110	2.79	2.71	68.8	5.80	9293	10003	535	475
112-31-3802		4		-	140	3.56	3.07	78.0	7.43	11801	12563	428	380
112-31-3803		4		1	140	3.56	3.07	78.0	7.43	12061	12994	428	380
112-31-3804	1000(61X) (507mm²)	3	80	-	140	3.56	3.09	78.5	7.56	11957	12719	615	545
112-31-3805		3		1/0	140	3.56	3.09	78.5	7.56	12281	13214	615	545
112-31-3806		4		-	140	3.56	3.43	87.1	9.33	15337	16507	492	436
112-31-3807		4		1/0	140	3.56	3.43	87.1	9.33	15702	16832	492	436
* Grounds may be split.

Conductor Color Coding Sequence
Conductor Number	Base Color	Tracer Color
1	Black	-
2	Red	-
3	Blue	-
4	Orange	-
5	Yellow	-
6	Brown	-
7	Red	Black
8	Blue	Black
9	Orange	Black
10	Yellow	Black
11	Brown	Black
12	Black	Red
13	Blue	Red
14	Orange	Red
15	Yellow	Red
16	Brown	Red
17	Black	Blue
18	Red	Blue
19	Orange	Blue
20	Yellow	Blue
21	Brown	Blue
22	Black	Orange
23	Red	Orange
24	Blue	Orange
25	Yellow	Orange
26	Brown	Orange
27	Black	Yellow
28	Red	Yellow
29	Blue	Yellow
30	Orange	Yellow
31	Brown	Yellow
32	Black	Brown
33	Red	Brown
34	Blue	Brown
35	Orange	Brown
36	Yellow	Brown
37	Black	-
Color Coding per ICEA Method 1, E-2 Sizes 6 AWG and larger: Surface Printing of Numbers and color per ICEA Method 3
Special Order: Any or all of the following conductors may be added to meet specific application requirements. These conductor codings comply with UL and NEC requirements.