Okonite Okonite-FMRŽ OkolonŽ Type TC Cable 600V Power and Control Tray Cable Multiple Copper Conductors with or without Grounding Conductors/90°C Wet or Dry Rating For Cable Tray Use

A Tin Coated Stranded Copper Conductors

B Okonite-FMR Insulation

C Fillers, as necessary

D Binder Tape

E Black Okolon Jacket

Insulation
Okonite-FMR is Okonite's trade name for its heat, moisture, flame and chemical resistant, mechanically rugged ethylene-propylene insulating compound.

The single conductors are color coded with solid and tracer colors as required for proper identification.

The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene-propylene rubber insulations.

Overall Jacket
The overall jacket is a vulcanized chlorosulfonated polyethylene compound. This combination construction assures circuit integrity because of its high mechanical strength and excellent resistance to moisture, ozone, and most chemicals.

Applications
Okonite-FMR Okolon Type TC tray cable is permitted for use on power, lighting, control, and signal circuits; indoors or outdoors; in cable trays, raceways, direct burial in the ground, or where supported in outdoor locations by a messenger wire; for Class 1 circuits as permitted in Article 725 of the NEC; and in cable trays in Class I, Division 2 hazardous locations in industrial establishments where the conditions of maintenance and supervision assure that only qualified persons will service the installation.

Specifications
Conductors: Tin coated copper per ASTM B-33 Class B stranded per ASTM B-8.

Insulation: Okonite-FMR meets or exceeds requirements of UL 1581 and ICEA S-95-658 NEMA/WC57 Type II insulation.

Color Coding: Base colors and tracers as shown on reverse of Data Sheet, black conductors with surface printing of numbers per ICEA S-73-532 NEMA/WC57 Method 4.

Grounding Conductor: Where indicated, tinned stranded copper per ASTM B-8, Class B and NEC Table 250-95.

Assembly: Conductors cabled in accordance with UL 1277 using fillers, as necessary, with a cable tape overall.

Overall Jacket: Complies with UL 1277. The Okolon compound meets or exceeds the requirements of UL 1581.

UL Listed as Type TC cable with a sunlight resistant jacket and for direct burial.

Product Features

For cable tray use.
For direct burial.
Sunlight resistant.
Insulated conductors are UL rated VW-1.
Flame retardant - passes the vertical tray flame test requirements of IEEE 383 and 1202, UL 1277 ICEA T-29-520(210,000 BTU/hr.).
90°C continuous rating in wet or dry locations; 130°C emergency overload rating; 250°C short circuit rating.
Okonite-FMR Okolon Type TC cable are quality control inspected to meet or exceed applicable industry standards.
Resistant to moisture and most chemical atmospheres.
Thermal stability at elevated temperatures.
Flexible, easy to install and terminate.
Mechanically rugged.
High dielectric strength.
Small diameter, lightweight.

1	2	3	4	5	6	7	8	9	10	11	12	13
202-10-2202	14(7X)	2	30	45	1.14	0.39	9.8	0.12	95	115	15	15
202-10-2203		3		45	1.14	0.41	10.3	0.13	115	135	15	15
202-10-2204		4		45	1.14	0.44	11.3	0.15	140	160	15	15
202-10-2205		5		45	1.14	0.48	12.2	0.18	165	185	15	15
202-10-2207		7		45	1.14	0.52	13.3	0.21	200	220	15	14
202-10-2209		9		60	1.52	0.64	16.2	0.32	290	310	15	14
202-10-2212		12		60	1.52	0.71	18.1	0.40	370	390	12	10
202-10-2219		19		60	1.52	0.83	21.0	0.54	510	530	12	10
202-10-2237		37		80	2.03	1.14	29.1	1.03	985	1005	10	8
202-10-2402	12(7X)	2	30	45	1.14	0.42	10.7	0.14	120	140	20	20
202-10-2403		3		45	1.14	0.45	11.3	0.16	145	165	20	20
202-10-2404		4		45	1.14	0.49	12.4	0.19	180	200	20	20
202-10-2405		5		45	1.14	0.53	13.5	0.22	220	240	20	20
202-10-2407		7		60	1.52	0.61	15.5	0.29	295	315	20	17
202-10-2409		9		60	1.52	0.70	17.9	0.39	390	410	20	17
202-10-2412		12		60	1.52	0.79	20.0	0.49	500	520	15	12
202-10-2419		19		80	2.03	0.96	24.4	0.72	745	765	15	12
202-10-2437		37		80	2.03	1.27	32.3	1.27	1355	1375	12	10
202-10-2502	10(7X)	2	30	45	1.14	0.47	11.9	0.17	160	180	30	30
202-10-2503		3		45	1.14	0.50	12.7	0.19	200	220	30	30
202-10-2504		4		60	1.52	0.58	14.6	0.26	270	290	30	28
202-10-2505		5		60	1.52	0.63	15.9	0.31	325	345	30	28
202-10-2507		7		60	1.52	0.68	17.3	0.36	405	425	28	24
202-10-2509		9		60	1.52	0.79	20.1	0.49	540	560	28	24
202-10-2512		12		80	2.03	0.93	23.6	0.68	745	765	28	24

Minimum Manufacturing Quantity for non-stock items; sizes #14-6 AWG - 5000'; sizes 4-1000 kcmil - 3000'.

Standard Package - 1000' Reels

Equipment Grounding Conductor: Any conductor in these cables may be permanently reidentified during installation as the equipment grounding conductor in accordance with Section 250-57 (b) of the NEC.

Ľ Cross-sectional area for calculation of cable tray fill in accordance with Section 318-9 of the NEC.

(1) Ampacities

Ampacities are based on 310-16 of the National Electrical Code for conductors rated 90°C, in a multi-conductor cable, at an ambient temperature of 30°C (86°F). The 75°C column is provided for additional information.

The ampacities shown apply to open runs of cable, installation in any approved raceway, direct burial in the earth, or as aerial cable on a messenger. Derating for more than three current carrying conductors within the cable is in accordance with Note 8 to NEC Tables 310-16 through 310-19.

The ampacities shown also apply to cables installed in cable tray in accordance with NEC Section 318-11.

1	2	3	4	5	6	7	8	9	10	11	12	13	14
112-10-2842	8(7X)	3	45	-	60	1.52	0.66	16.8	0.34	335	370	55	50
112-10-2844		3		10	60	1.52	0.66	16.8	0.34	370	400	55	50
112-10-2845		4		-	60	1.52	0.72	18.3	0.41	420	460	45	40
112-10-2847		4		10	60	1.52	0.72	18.3	0.41	450	490	45	40
112-10-2852	6(7X)	3	45	-	60	1.52	0.74	18.8	0.43	465	500	75	65
112-10-2854		3		2X10	60	1.52	0.74	18.8	0.43	515	550	75	65
112-10-2855		4		-	60	1.52	0.81	20.6	0.52	585	645	60	52
112-10-2857		4		8	60	1.52	0.81	20.6	0.52	635	695	60	52
112-10-2862	4(7X)	3	45	-	60	1.52	0.84	21.3	0.55	655	715	95	85
112-10-2864		3		3X12	60	1.52	0.84	21.3	0.55	710	765	95	85
112-10-2865		4		-	80	2.03	0.96	24.5	0.73	880	970	76	68
112-10-2867		4		8	80	2.03	0.96	24.5	0.73	930	1020	76	68
112-10-2872	2(7X)	3	45	-	80	2.03	1.01	25.6	0.80	1000	1090	130	115
112-10-2874		3		3X12	80	2.03	1.01	25.6	0.80	1080	1175	130	115
112-10-2875		4		-	80	2.03	1.11	28.1	0.96	1270	1365	104	92
112-10-2877		4		8	80	2.03	1.11	28.1	0.96	1350	1445	104	92
112-10-2882	1(19X)	3	55	-	80	2.03	1.14	28.9	1.01	1250	1345	150	130
112-10-2884		3		6	80	2.03	1.14	28.9	1.01	1330	1425	150	130
112-10-2885		4		-	80	2.03	1.25	31.8	1.23	1595	1700	120	104
112-10-2887		4		6	80	2.03	1.25	31.8	1.23	1675	1780	120	104
112-10-2892	1/0(19X)	3	55	-	80	2.03	1.22	31.0	1.17	1510	1615	170	150
112-10-2894		3		6	80	2.03	1.22	31.0	1.17	1590	1695	170	150
112-10-2895		4		-	80	2.03	1.35	34.2	1.43	1930	2055	136	120
112-10-2897		4		6	80	2.03	1.35	34.2	1.43	2010	2135	136	120
112-10-2902	2/0(19X)	3	55	-	80	2.03	1.32	33.5	1.36	1835	1955	195	175
112-10-2904		3		3X10	80	2.03	1.32	33.5	1.36	1915	2040	195	175
112-10-2905		4		-	80	2.03	1.45	36.9	1.66	2350	2530	156	140
112-10-2907		4		6	80	2.03	1.45	36.9	1.66	2430	2610	156	140
112-10-2922	4/0(19X)	3	55	-	80	2.03	1.55	39.3	-	2735	2915	260	230
112-10-2924		3		3X8	80	2.03	1.55	39.3	-	2865	3040	260	230
112-10-2925		4		-	110	2.79	1.77	45.1	-	3645	3895	208	184
112-10-2927		4		4	110	2.79	1.77	45.1	-	3775	4025	208	184
112-10-2928	250(37X)	3	65	-	110	2.79	1.76	44.6	-	3355	3605	290	255
112-10-2929		3		4	110	2.79	1.76	44.6	-	3485	3735	290	255
112-10-2930		4		-	110	2.79	1.94	49.2	-	4305	4555	232	185
112-10-2931		4		4	110	2.79	1.94	49.2	-	4435	4685	232	185
112-10-2932	350(7X)	3	65	-	110	2.79	1.98	50.3	-	4495	4895	350	310
112-10-2933		3		3	110	2.79	1.98	50.3	-	4655	5055	350	310
112-10-2934		4		-	110	2.79	2.19	55.6	-	5790	6190	280	248
112-10-2935		4		3	110	2.79	2.19	55.6	-	5955	6355	280	248
112-10-2936	500(37X)	3	65	-	110	2.79	2.26	57.4	-	6175	6715	430	380
112-10-2937		3		2	110	2.79	2.26	57.4	-	6380	6920	430	380
112-10-2938		4		-	110	2.79	2.50	63.5	-	7980	8520	344	304
112-10-2939		4		2	110	2.79	2.50	63.5	-	8185	8725	344	304
112-10-2940	750(61X)	3	80	-	110	2.79	2.71	68.9	-	9090	9670	535	475
112-10-2941		3		1	110	2.79	2.71	68.9	-	9350	9925	535	475
112-10-2942		4		-	140	3.56	3.07	77.9	-	11985	12810	428	380
112-10-2943		4		1	140	3.56	3.07	77.9	-	12245	13070	428	380
112-10-2944	1000(61X)	3	80	-	140	3.56	3.10	78.6	-	12030	12855	615	345
112-10-2945		3		1/0	140	3.56	3.10	78.6	-	12355	13180	615	345
112-10-2946		4		-	140	3.56	3.43	87.2	-	15590	16720	492	430
112-10-2947		4		1/0	140	3.56	3.43	87.2	-	15910	17040	492	430

Conductor Color Coding Sequence - Sizes 14, 12 & 10 AWG
Conductor Number	Base Color	Tracer Color
1	Black	-
2	Red	-
3	Blue	-
4	Orange	-
5	Yellow	-
6	Brown	-
7	Red	Black
8	Blue	Black
9	Orange	Black
10	Yellow	Black
11	Brown	Black
12	Black	Red
13	Blue	Red
14	Orange	Red
15	Yellow	Red
16	Brown	Red
17	Black	Blue
18	Red	Blue
19	Orange	Blue
20	Yellow	Blue
21	Brown	Blue
22	Black	Orange
23	Red	Orange
24	Blue	Orange
25	Yellow	Orange
26	Brown	Orange
27	Black	Yellow
28	Red	Yellow
29	Blue	Yellow
30	Orange	Yellow
31	Brown	Yellow
32	Black	Brown
33	Red	Brown
34	Blue	Brown
35	Orange	Brown
36	Yellow	Brown
37	Black	-
Color Coding per ICEA Method 1, E-2 Sizes 8 AWG and larger: Surface Printing of Numbers per ICEA Method 4
Special Order: Any or all of the following conductors may be added when specifically requested by the customer to meet his specific application requirements. These conductor codings comply with UL and NEC requirements.