Okonite Okonite-FMRŽ OkosealŽ (70)Type TC Cable 600V Power and Control Tray Cable Multiple Copper Conductors with or Without Grounding Conductors/90°C Wet or Dry Rating For Cable Tray Use

A Copper Stranded Conductors

B Okonite-FMR Insulation

C Fillers, as necessary

D Binder Tape

E Okoseal Jacket - Black

Insulation
Okonite-FMR is Okonite's trade name for its heat, moisture, flame and chemical resistant, mechanically rugged ethylene-propylene insulating compound.

The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene-propylene rubber insulations.

Overall Jacket
The Okoseal (PVC) jacket is mechanically rugged and has excellent resistance to most chemicals.

Applications
Okonite-FMR Okoseal Type TC-ER tray cable is permitted for use on power, lighting, control, and signal circuits; indoors or outdoors; in cable trays, raceways, direct burial in the ground, or where supported in outdoor locations by a messenger wire; for Class 1 circuits as permitted in Article 725 of the NEC; and in cable trays in Class I, Division 2 hazardous locations in industrial establishments where the conditions of maintenance and supervision assure that only qualified persons will service the installation. Cables marked TC-ER may also be used between a cable tray and the utilization equipment or device, when installed in accordance with NEC 336.10(7).

Specifications
Conductors: Class B stranded per ASTM B-8. Sizes #10 AWG and smaller - Tin coating per ASTM B-33. Sizes #8 AWG and larger - Bare Copper.

Insulation: Okonite-FMR meets or exceeds requirements of UL 1581 and ICEA S-95-658 NEMA/WC70 Type II insulation.

Color Coding: Base colors and tracers as shown on reverse of Data Sheet and for sizes #8 AWG and larger black conductors with surface printing of numbers per ICEA S-73-532 NEMA/WC57 Method 4.

Grounding Conductor: Where indicated, bare or green insulated stranded copper per ASTM B-8, Class B & NEC Table 250.122.

Assembly: Conductors cabled in accordance with UL 1277 using fillers, as necessary, with a cable tape overall.

Overall Jacket: Complies with UL 1277. The Okoseal compound meets or exceeds the requirements of UL 1581.

UL Listed as Type TC-ER cable with a sunlight resistant jacket and for direct burial.

Sizes 4 AWG and larger without a grounding conductor are Type TC.

Product Features

For cable tray use.
For direct burial.
Sunlight resistant.
Insulated conductors are UL rated VW-1.
Flame Retardant - passes the vertical tray flame test requirements of IEEE 383 & 1202 and UL 1277. Sizes 250 kcmil and larger also meet ICEA T-29-520 (210,000 BTU/hr.).
UL 1309 and ABS listed as Marine Shipboard Cable (Oko-Marine).
90°C continuous rating in wet or dry 130°C emergency overload rating 250°C short circuit rating.
Okonite-FMR Okoseal Type TC-ER cables are quality control inspected to meet or exceed applicable industry standards.
Resistant to moisture and most chemical atmospheres.
Thermal stability at elevated temperatures.
Flexible, easy to install and terminate.
Mechanically rugged.
High dielectric strength.
Small diameter, lightweight.

1	2	3	4	5	6	7	8	9	10	11	12	13	14
202-10-3202	14(7X)	2	30	-	45	1.14	0.38	09.6	0.12	79	90	15	15
202-10-3203		3		-	45	1.14	0.40	10.2	0.13	104	127	15	15
202-10-3204		4		-	45	1.14	0.44	11.2	0.16	126	149	15	15
202-10-3205		5		-	45	1.14	0.48	12.2	0.18	151	174	15	15
202-10-3207		7		-	45	1.14	0.52	13.2	0.22	195	218	15	14
202-10-3209		9		-	60	1.52	0.63	16.0	0.32	260	292	15	14
202-10-3212		12		-	60	1.52	0.71	18.0	0.40	332	364	12	10
202-10-3219		19		-	60	1.52	0.82	20.8	0.54	480	519	12	10
202-10-3237		37		-	80	2.03	1.14	29.0	1.03	925	1005	10	8
202-10-3402	12(7X)	2	30	-	45	1.14	0.42	10.7	0.14	102	125	20	20
202-10-3403		3		-	45	1.14	0.44	11.2	0.16	134	157	20	20
202-10-3443		3		12	45	1.14	0.48	12.2	0.18	162	185	20	20
202-10-3404		4		-	45	1.14	0.48	12.2	0.19	167	190	20	20
202-10-3405		5		-	45	1.14	0.52	13.2	0.22	202	225	20	20
202-10-3407		7		-	60	1.52	0.60	15.2	0.29	281	305	20	17
202-10-3409		9		-	60	1.52	0.70	17.8	0.39	363	395	20	17
202-10-3412		12		-	60	1.52	0.78	19.8	0.49	446	485	15	12
202-10-3419		19		-	80	2.03	0.95	24.1	0.73	697	752	15	12
202-10-3437		37		-	80	2.03	1.26	32.0	1.27	1266	1346	12	10
202-10-3502	10(7X)	2	30 -	-	45	1.14	0.46	11.7	0.17	140	163	30	30
202-10-3503		3		-	45	1.14	0.49	12.4	0.20	183	206	30	30
202-10-3543		3		10	45	1.14	0.53	13.5	0.23	223	247	30	30
202-10-3504		4		-	60	1.52	0.57	14.5	0.26	243	267	30	28
202-10-3505		5		-	60	1.52	0.62	15.7	0.31	294	318	30	28
202-10-3507		7		-	60	1.52	0.67	17.0	0.37	384	416	28	24
202-10-3509		9		-	60	1.52	0.78	19.8	0.49	494	533	28	24
202-10-3512		12		-	80	2.03	0.92	23.4	0.68	669	724	20	17

Authorized stock item - Available from our Service Centers.

Minimum Manufacturing Quantity for non-stock items; sizes #14-6 AWG - 5000'; sizes 4-1000 kcmil - 3000'.

Standard Package - 1000' Reels

Equipment Grounding Conductor: Any conductor in these cables may be permanently reidentified during installation as the equipment grounding conductor in accordance with Section 250-57 (b) of the NEC.

ĽCross-sectional area for calculation of cable tray fill in accordance with Section 318-9 of the NEC.

(1) Ampacities

Ampacities are based on 310-16 of the National Electrical Code for conductors rated 90°C, in a multi-conductor cable, at an ambient temperature of 30°C (86°F). The 75°C column is provided for additional information.

The ampacities shown apply to open runs of cable, installation in any approved raceway, direct burial in the earth, or as aerial cable on a messenger. Derating for more than three current carrying conductors within the cable is in accordance with Note 8 to NEC Tables 310-16 through 310-19.

The ampacities shown also apply to cables installed in cable tray in accordance with NEC Section 318-11.

1	2	3	4	5	6	7	8	9	10	11	12	13	14
112-10-3842	8(7X)	3	45	-	60	1.52	0.64	16.3	0.34	282	314	55	50
112-10-3844		3		10*	60	1.52	0.67	17.0	0.34	332	364	55	50
112-10-3845		4		-	60	1.52	0.73	18.5	0.41	374	413	45	40
112-10-3847		4		10*	60	1.52	0.75	19.1	0.41	427	466	45	40
112-10-3852	6(7X)	3	45	-	60	1.52	0.75	19.1	0.43	416	455	75	65
112-10-3854		3		8*	60	1.52	0.77	19.6	0.43	482	521	75	65
112-10-3855		4		-	60	1.52	0.82	20.1	0.52	533	572	60	52
112-10-3857		4		8*	60	1.52	0.85	21.6	0.52	593	648	60	52
112-10-3862	4(7X)	3	45	-	60	1.52	0.85	21.6	0.55	610	665	95	85
112-10-3864		3		8*	60	1.52	0.89	22.6	0.55	703	758	95	85
112-10-3865		4		-	80	2.03	0.97	24.6	0.73	810	865	76	68
112-10-3867		4		8*	80	2.03	1.04	26.4	0.73	928	992	76	68
112-10-3872	2(7X)	3	45	-	80	2.03	1.02	25.9	0.80	924	979	130	115
112-10-3874		3		6	80	2.03	1.02	25.9	0.80	997	1052	130	115
112-10-3875		4		-	80	2.03	1.12	28.4	0.97	1179	1259	104	92
112-10-3877		4		6	80	2.03	1.16	29.5	0.97	1291	1371	104	92
112-10-3882	1(19X)	3	55	-	80	2.03	1.14	29.0	1.02	1150	1230	150	130
112-10-3884		3		6	80	2.03	1.14	29.0	1.02	1233	1303	150	130
112-10-3885		4		-	80	2.03	1.25	31.8	1.23	1472	1562	120	104
112-10-3887		4		6	80	2.03	1.24	31.5	1.23	1538	1638	120	104
112-10-3892	1/0(19X)	3	55	-	80	2.03	1.22	31.0	1.18	1396	1468	170	150
112-10-3894		3		6	80	2.03	1.22	31.0	1.18	1469	1559	170	150
112-10-3895		4		-	80	2.03	1.35	34.3	1.43	1771	1871	136	120
112-10-3897		4		6	80	2.03	1.35	34.3	1.43	1859	1959	136	120
112-10-3902	2/0(19X)	3	55	-	80	2.03	1.32	33.5	1.37	1710	1810	195	175
112-10-3904		3		6	80	2.03	1.32	33.5	1.37	1819	1919	195	175
112-10-3905		4		-	80	2.03	1.45	36.8	1.66	2180	2296	156	140
112-10-3907		4		6	80	2.03	1.53	38.9	1.66	2398	2541	156	140
112-10-3922	4/0(19X)	3	55	-	80	2.03	1.55	39.4	-	2529	2672	260	230
112-10-3924		3		4	80	2.03	1.55	39.4	-	2646	2789	260	230
112-10-3925		4		-	110	2.79	1.77	50.0	-	3381	3615	208	184
112-10-3927		4		4	110	2.79	1.77	50.0	-	3498	3732	208	184
112-10-3928	250(37X)	3	65	-	110	2.79	1.76	44.7	-	3128	3362	290	255
112-10-3929		3		4	110	2.79	1.76	44.7	-	3275	3506	290	255
112-10-3930		4		-	110	2.79	1.94	49.3	-	3964	4230	232	185
112-10-3931		4		4	110	2.79	1.94	49.3	-	4115	4381	232	185
112-10-3932	350(37X)	3	65	-	110	2.79	1.98	50.3	-	4151	4407	350	310
112-10-3933		3		3	110	2.79	1.98	50.3	-	4301	4557	350	310
112-10-3934		4		-	110	2.79	2.19	55.6	-	5342	5742	280	248
112-10-3935		4		3	110	2.79	2.19	55.6	-	5492	5892	280	248
112-10-3936	500(37X)	3	65	-	110	2.79	2.26	57.4	-	5718	6272	430	380
112-10-3937		3		2	110	2.79	2.26	57.4	-	5909	6468	430	380
112-10-3938		4		-	110	2.79	2.50	63.5	-	7427	7986	344	304
112-10-3939		4		2	110	2.79	2.50	63.5	-	7618	8177	344	304
112-10-3940	750(61X)	3	80	-	110	2.79	2.70	68.6	-	8415	9125	535	475
112-10-3941		3		1	110	2.79	2.70	68.6	-	8717	9427	535	475
112-10-3942		4		-	140	3.56	3.01	76.5	-	10909	11621	428	380
112-10-3943		4		1	140	3.56	3.01	76.5	-	11211	11973	428	380
112-10-3944	1000(61X)	3	80	-	140	3.56	3.04	77.2	-	10940	11702	615	545
112-10-3945		3		1/0	140	3.56	3.04	77.2	-	11242	12004	615	545
112-10-3946		4		-	140	3.56	3.37	85.6	-	14258	15191	492	436
112-10-3947		4		1/0	140	3.56	3.37	85.6	-	14560	15493	492	436
* Grounds may be split. Ground conductor sizes marked with an asterisk are green insulated.
NOTE: Sizes 4 AWG and larger without a grounding conductor are Type TC only.

Conductor Color Coding Sequence - Sizes 14, 12 & 10 AWG
Conductor Number	Base Color	Tracer Color
1	Black	-
2	Red	-
3	Blue	-
4	Orange	-
5	Yellow	-
6	Brown	-
7	Red	Black
8	Blue	Black
9	Orange	Black
10	Yellow	Black
11	Brown	Black
12	Black	Red
13	Blue	Red
14	Orange	Red
15	Yellow	Red
16	Brown	Red
17	Black	Blue
18	Red	Blue
19	Orange	Blue
20	Yellow	Blue
21	Brown	Blue
22	Black	Orange
23	Red	Orange
24	Blue	Orange
25	Yellow	Orange
26	Brown	Orange
27	Black	Yellow
28	Red	Yellow
29	Blue	Yellow
30	Orange	Yellow
31	Brown	Yellow
32	Black	Brown
33	Red	Brown
34	Blue	Brown
35	Orange	Brown
36	Yellow	Brown
37	Black	-
Color Coding per ICEA Method 1, E-2 Sizes 8 AWG and larger: Surface Printing of Numbers per ICEA Method 4
Special Order: Any or all of the following conductors may be added when specifically requested by the customer to meet his specific application requirements. These conductor codings comply with UL and NEC requirements.