Okonite Okonite-FMRŽ OkosealŽ (210) Type TC Cable 600V Power and Control Tray Cable Multiple Copper Conductors With or Without Grounding Conductors/90°C Wet or Dry Rating For Cable Tray Use

A Tin Coated Stranded Copper Conductors

B Okonite-FMR Insulation

C Fillers, as necessary

D Binder Tape

E Okoseal Jacket - Black

Insulation
Okonite-FMR is Okonite's trade name for its heat, moisture, flame and chemical resistant, mechanically rugged ethylene-propylene insulating compound.

The properties of Okonite-FMR insulation substantially enhance the well known features of ethylene-propylene rubber insulations.

Overall Jacket
The Okoseal (PVC) jacket is mechanically rugged and has excellent resistance to most chemicals.

Applications
Okonite-FMR Okoseal Type TC tray cable is permitted for use on power, lighting, control, and signal circuits; indoors or outdoors; in cable trays, raceways, direct burial in the ground, or where supported in outdoor locations by a messenger wire; for Class 1 circuits as permitted in Article 725 of the NEC; and in cable trays in Class I, Division 2 hazardous locations in industrial establishments where the conditions of maintenance and supervision assure that only qualified persons will service the installation.

Specifications
Conductors: Tin coated copper per ASTM B-33, Class B stranded per ASTM B-8.

Insulation: Okonite-FMR meets or exceeds requirements of UL 1581 and ICEA S-95-658 NEMA/WC70 Type II insulation.

Color Coding: Base colors and tracers as shown on reverse of Data Sheet or black conductors with surface printing of numbers per ICEA 73-532 NEMA/WC57 Method 4.

Grounding Conductor: Where indicated, bare stranded copper per ASTM B-8, Class B, and NEC Table 250-95.

Assembly: Conductors cabled in accordance with UL 1277 using fillers, as necessary, with a cable tape overall.

Overall Jacket: Complies with UL 1277. The Okoseal compound meets or exceeds the requirements of UL 1581.

UL Listed as Type TC cable with a sunlight resistant jacket and for direct burial.

Product Features

For cable tray use.
For direct burial.
Sunlight resistant.
Insulated conductors are UL rated VW-1.
Flame retardant - passes the vertical tray flame test requirements of IEEE 383 and 1202, UL 1277 & ICEA T-29-520 (210,000 BTU/hr.)
90°C continuous rating in wet or dry locations; 130°C emergency overload rating; 250°C short circuit rating.
Okonite-FMR Okoseal Type TC cables are quality control inspected to meet or exceed applicable industry standards.
Resistant to moisture and most chemical atmospheres.
Thermal stability at elevated temperatures.
Flexible, easy to install and terminate.
Mechanically rugged.
High dielectric strength.
Small diameter, lightweight.

1	2	3	4	5	6	7	8	9	10	11	12	13
202-10-4202	14(7X)	2	30	45	1.14	0.39	09.9	0.12	79	102	15	15
202-10-4203		3		45	1.14	0.41	10.4	0.13	100	123	15	15
202-10-4204		4		45	1.14	0.45	11.4	0.16	123	146	15	15
202-10-4205		5		45	1.14	0.50	12.7	0.18	156	179	15	15
202-10-4207		7		45	1.14	0.53	13.5	0.22	191	214	15	14
202-10-4237		9		60	1.52	0.64	16.3	0.32	258	290	15	14
202-10-4212		12		60	1.52	0.72	18.3	0.40	327	366	12	10
202-10-4219		19		60	1.52	0.83	21.1	0.54	482	521	12	10
202-10-4237		37		80	2.03	1.15	29.1	1.03	917	997	10	8
202-10-4402	12(7X)	2	30	45	1.14	0.42	10.7	0.14	102	125	20	20
202-10-4403		3		45	1.14	0.45	11.4	0.16	131	154	20	20
202-10-4404		4		45	1.14	0.49	12.4	0.19	163	186	20	20
202-10-4405		5		45	1.14	0.53	13.4	0.22	198	222	20	20
202-10-4407		7		60	1.52	0.61	15.5	0.29	277	301	20	17
202-10-4409		9		60	1.52	0.71	18.0	0.39	354	386	20	17
202-10-4412		12		60	1.52	0.79	20.1	0.49	446	485	15	12
202-10-4419		19		80	2.03	0.96	24.4	0.73	703	758	15	12
202-10-4437		37		80	2.03	1.27	32.3	1.27	1272	1362	12	10
202-10-4502	10(7X)	2	30	45	1.14	0.47	11.9	0.17	138	161	30	30
202-10-4503		3		45	1.14	0.50	12.7	0.20	180	203	30	30
202-10-4504		4		60	1.52	0.58	14.7	0.26	245	269	30	28
202-10-4505		5		60	1.52	0.63	16.0	0.31	294	318	30	28
202-10-4507		7		60	1.52	0.68	17.3	0.37	385	417	28	24
202-10-4509		9		60	1.52	0.79	20.1	0.49	493	532	28	24
202-10-4512		12		80	2.03	0.93	23.6	0.68	667	722	20	17

Authorized stock item-Available from our Service Centers.

Minimum Manufacturing Quanity for non-stock items; sizes #14-6 AWG - 5000'; sizes 4-1000 kcmil-3000'.

Equipment Grounding Conductor: Any conductor in these cables may be permanently reidentified during installation as the equipment grounding conductor in accordance with Section 250-57 (b) of the NEC.

Ľ Cross-sectional area for calculation of cable tray fill in accordance with NEC Section 318-9 of the NEC.

(1) Ampacities

Ampacities are based on 310-16 of the National Electrical Code for conductors rated 90°C, in a multi-conductor cable, at an ambient temperature of 30°C (86°F). The 75°C column is provided for additional information.

The ampacities shown apply to open runs of cable, installation in any approved raceway, direct burial in the earth, or as aerial cable on a messenger. Derating for more than three current carrying conductors within the cable is in accordance with Note 8 to NEC Tables 310-16 through 310-19.

The ampacities shown also apply to cables installed in cable tray in accordance with NEC Section 318-11.

1	2	3	4	5	6	7	8	9	10	11	12	13	14
112-10-4842	8(7X)	3	45	-	60	1.52	0.66	16.8	0.34	296	328	55	50
112-10-4844		3		10	60	1.52	0.66	16.8	0.34	326	358	55	50
112-10-4845		4		-	60	1.52	0.72	18.3	0.41	372	411	45	40
112-10-4847		4		10	60	1.52	0.75	19.1	0.41	418	457	45	40
112-10-4852	6(7X)	3	45	-	60	1.52	0.74	18.8	0.43	410	449	75	65
112-10-4854		3		8	60	1.52	0.76	19.3	0.43	473	512	75	65
112-10-4855		4		-	60	1.52	0.81	20.6	0.52	525	564	60	52
112-10-4857		4		8	60	1.52	0.85	21.6	0.52	592	647	60	52
112-10-4862	4(7X)	3	45	-	60	1.52	0.84	21.3	0.56	596	635	95	85
112-10-4864		3		8	60	1.52	0.89	22.6	0.56	690	745	95	85
112-10-4865		4		-	80	2.03	0.97	24.6	0.73	798	853	76	68
112-10-4867		4		8	80	2.03	1.03	26.2	0.73	911	966	76	68
112-10-4872	2(7X)	3	45	-	80	2.03	1.01	25.7	0.80	909	973	130	115
112-10-4874		3		6	80	2.03	1.05	26.7	0.80	1010	1077	130	115
112-10-4875		4		-	80	2.03	1.11	28.2	0.97	1163	1243	104	92
112-10-4877		4		6	80	2.03	1.15	29.2	0.97	1270	1350	104	92
112-10-4882	1(19X)	3	55	-	80	2.03	1.14	29.0	1.02	1132	1212	150	130
112-10-4884		3		6	80	2.03	1.14	29.0	1.02	1207	1287	150	130
112-10-4885		4		-	80	2.03	1.25	31.8	1.23	1457	1537	120	104
112-10-4887		4		6	80	2.03	1.25	31.8	1.23	1533	1622	120	104
112-10-4892	1/0(19X)	3	55	-	80	2.03	1.23	31.2	1.18	1374	1464	170	150
112-10-4894		3		6	80	2.03	1.23	31.2	1.18	1449	1539	170	150
112-10-4895		4		-	80	2.03	1.35	34.3	1.43	1772	1872	136	120
112-10-4897		4		6	80	2.03	1.35	34.3	1.43	1847	1947	136	120
112-10-4902	2/0(19X)	3	55	-	80	2.03	1.32	33.5	1.37	1687	1787	195	175
112-10-4904		3		6	80	2.03	1.32	33.5	1.37	1807	1907	195	175
112-10-4905		4		-	80	2.03	1.46	37.1	1.66	2160	2276	156	140
112-10-4907		4		6	80	2.03	1.54	39.1	1.66	2360	2503	156	140
112-10-4922	4/0(19X)	3	55	-	80	2.03	1.55	39.4	-	2497	2640	260	230
112-10-4924		3		4	80	2.03	1.55	39.4	-	2617	2760	260	230
112-10-4925		4		-	110	2.79	1.78	45.2	-	3354	3588	208	184
112-10-4927		4		4	110	2.79	1.78	45.2	-	3476	3708	208	184
112-10-3928	250(37X)	3	65	-	110	2.79	1.76	44.7	-	3081	3315	290	255
112-10-3929		3		4	110	2.79	1.76	44.7	-	3232	3466	290	255
112-10-3930		4		-	110	2.79	1.94	49.3	-	3961	4227	232	185
112-10-3931		4		4	110	2.79	1.94	49.3	-	4112	4378	232	185
112-10-3932	350(7X)	3	65	-	110	2.79	1.98	50.3	-	4148	4404	350	310
112-10-3933		3		3	110	2.79	1.98	50.3	-	4299	4555	350	310
112-10-3934		4		-	110	2.79	2.19	55.6	-	5339	5739	280	248
112-10-3935		4		3	110	2.79	2.19	55.6	-	5489	5889	280	248
112-10-3936	500(37X)	3	65	-	110	2.79	2.26	57.4	-	5715	6274	430	380
112-10-3937		3		2	110	2.79	2.26	57.4	-	5906	6465	430	380
112-10-3938		4		-	110	2.79	2.50	63.5	-	7424	7983	344	304
112-10-3939		4		2	110	2.79	2.50	63.5	-	7614	8173	344	304
112-10-3940	750(61X)	3	80	-	110	2.79	2.72	69.1	-	8411	9121	535	475
112-10-3941		3		1	110	2.79	2.72	69.1	-	8714	9424	535	475
112-10-3942		4		-	140	3.56	3.07	78.0	-	11080	11842	428	380
112-10-3943		4		1	140	3.56	3.07	78.0	-	11383	12145	428	380
112-10-3944	1000(61X)	3	80	-	140	3.56	3.10	78.7	-	11113	11875	615	545
112-10-3945		3		1/0	140	3.56	3.10	78.7	-	11415	12177	615	545
112-10-3946		4		-	140	3.56	3.43	87.1	-	14449	15382	492	436
112-10-3947		4		1/0	140	3.56	3.43	87.1	-	14752	15685	492	436

Conductor Color Coding Sequence
Conductor Number	Base Color	Tracer Color
1	Black	-
2	Red	-
3	Blue	-
4	Orange	-
5	Yellow	-
6	Brown	-
7	Red	Black
8	Blue	Black
9	Orange	Black
10	Yellow	Black
11	Brown	Black
12	Black	Red
13	Blue	Red
14	Orange	Red
15	Yellow	Red
16	Brown	Red
17	Black	Blue
18	Red	Blue
19	Orange	Blue
20	Yellow	Blue
21	Brown	Blue
22	Black	Orange
23	Red	Orange
24	Blue	Orange
25	Yellow	Orange
26	Brown	Orange
27	Black	Yellow
28	Red	Yellow
29	Blue	Yellow
30	Orange	Yellow
31	Brown	Yellow
32	Black	Brown
33	Red	Brown
34	Blue	Brown
35	Orange	Brown
36	Yellow	Brown
37	Black	-
Color Coding per ICEA Method 1, E-2 Sizes 8 AWG and larger: Surface Printing of Numbers per ICEA Method 4
Special Order: Any or all of the following conductors may be added when specifically requested by the customer to meet his specific application requirements. These conductor codings comply with UL and NEC requirements.