Okonite C-L-X®Type MV-105 or MC-HL 5/8kV Okoguard® Shielded Power Cable-Aluminum Sheath 3 Okopact® (Compact Stranded) Copper Conductors/105°C Rating 5kV-133% or 8kV-100% Insulation Level

A Uncoated (Compact Stranded) Copper Conductors

B Extruded Semiconducting EPR Strand Screen

C Okoguard Insulation (EPR)

D Extruded Semiconducting EPR Insulation Screen

E Phase Identification Tape

F Copper Grounding Conductor, where indicated

G Uncoated Copper Shield

H Fillers and Binder Tape

J Impervious, Continuous, Corrugated Aluminum C-L-X Sheath

K Jacket-Yellow Okoseal

Insulation
Okoguard Is Okonite's registered trade name for its exclusive ethylene-propylene rubber (EPR) base, thermosetting compound, whose optimum balance of electrical and physical properties is unequaled in other solid dielectrics. Okoguard insulation, with the distinctive red color and a totally integrated EPR system, provides the optimum balance of electrical and physical properties for long, problem free service.

Assembly
Type MV-105 conductors are assembled with fillers, one bare stranded grounding conductor and a binder tape into a round core. A continuously corrugated welded aluminum sheath (C-L-X) encases the cable core. The C-L-X sheath is protected with a low temperature yellow Okoseal^® jacket. The impervious, continuous, corrugated aluminum C-L-X sheath provides complete protection against moisture, liquids and gases in addition to its excellent mechanical strength. In addition, the aluminum sheath has adequate ampacity capability to be used as a grounding conductor in non HL areas. The Okoseal jacket allows the cable to be direct buried in the ground, embedded in concrete or areas subjected to corrosive atmospheres.

Applications
C-L-X power cables are recommended as an economical alternate to a wire in conduit system. They are designed specifically for use as feeders or branch circuits in industrial and utility power distribution systems. C-L-X power cables may be installed in both exposed and concealed work, wet and dry locations, directly buried in the earth, or embedded in concrete. They may be installed on metal racks, troughs, in cable trays or secured to supports not greater than 6 feet apart.

C-L-X Type MC-HL cables are also approved for Classes I, II, and III, Division 1 and 2 and Class I, Zone 1 and 2 hazardous locations - NEC Articles 501, 502, 503 and 505.

Specifications
Conductor: Uncoated copper compact stranded per ASTM B-496.

Strand Screen: Extruded semiconducting EPR strand screen meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 and UL 1072.

Insulation: Okoguard meets or exceeds the electrical and physical requirements of ICEA S-93-639/NEMA WC74 and UL 1072. The insulated conductors are tested in accordance with AEIC CS8.

Insulation Screen: Extruded semiconducting EPR insulation screen per ICEA S-93-639/NEMA WC74, AEIC CS8 and UL 1072.

Shield: 5 mil uncoated copper tape with 12.5% nominal overlap.

Phase Identification: Color coded (black, red, blue) polyester ribbon laid longitudinally under the copper shield.

Grounding Conductor: Uncoated copper in accordance with UL 1072.

Assembly: Cabled with fillers in the interstices, binder tape overall.

Sheath: Close fitting, impervious, continuous, corrugated aluminum C-L-X per UL 1072, and UL listing E-60545; C-L-X is recognized as a grounding conductor by NEC.

Jacket: A low temperature, sunlight resistant, yellow PVC jacket in accordance with UL 1072. Other color jackets are available. UL Listed as type MV-105 or MC-HL, sunlight resistant for use in cable tray, and for direct burial in accordance with UL 1072 & 2225. Conforms to applicable requirements of IEC 502, 540, and 332-3. CSA Listed to C68.3.

Product Features

Triple tandem extruded, all EPR system.
Complete prepackaged, color coded, factory tested wiring system.
Okoguard C-L-X cables meet or exceed all recognized industry standards (UL, AEIC, NEMA/ICEA, IEEE).
Passes the vertical tray flame test requirements of IEEE 383 and 1202, UL 1072, ICEA T-29-520 (210,000 BTU/hr.) and the 210,000 BTU/hr. corner configuration test.
Complies with NEC Sections 310.7 and 300.50 for direct burial.
Complies with NEC Articles 501, 502, 503 and 505 for hazardous locations.
Continuous sheath provides grounding safety.
Excellent corona resistance.
Screens are clean stripping.
Exceptional resistance to "treeing".
Installation temperature of -40°C.
Improved Temperature Rating.
Three symmetrical grounding conductors for PWM/VFD and other modern AC drive/motor applications.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17
With Yellow Okoseal Jacket
571-22-3694	8	8.4	0.40	3x12	1.08	27.4	1.34	50	1.27	1.45	36.8	950	1056	66	58	90
571-22-3696	6	13.3	0.44	3x10	1.15	29.2	1.37	50	1.27	1.48	37.6	1116	1259	88	77	115
571-22-3698	4	21.2	0.48	3x10	1.24	31.5	1.51	60	1.52	1.65	41.9	1413	1556	115	100	150
571-22-3706	2	33.6	0.54	3x10	1.37	34.8	1.64	60	1.52	1.78	45.2	1726	1890	154	135	190
571-22-3708	1	42.4	0.57	3x8	1.47	37.3	1.69	60	1.52	1.82	46.2	1973	2137	180	155	215
571-22-3710	1/0	53.5	0.61	3x8	1.56	39.6	1.78	60	1.52	1.91	48.5	2254	3012	205	185	245
571-22-3717	2/0	67.4	0.65	3x8	1.66	42.2	1.92	60	1.52	2.05	52.0	2621	4171	240	210	280
571-22-3725	4/0	107.0	0.75	3x7	1.89	48.0	2.15	60	1.52	2.28	57.9	3645	3980	320	285	360
571-22-3727	250	127.0	0.79	3x7	2.01	51.1	2.23	60	1.52	2.36	59.9	4055	4390	355	315	395
571-22-3838	350	177.0	0.89	3x6	2.24	56.9	2.45	75	1.91	2.60	66.1	5040	5435	440	390	475
571-22-3846	500	253.0	1.01	3x5	2.39	65.0	2.75	75	1.91	2.91	75.2	7132	7603	545	475	570
571-22-3748	750	380.0	1.19	3x4	3.07	78.0	3.32	85	2.16	3.50	88.9	10263	11021	685	585	700
571-22-3751	1000	507.0	1.35	3x4	3.43	87.1	3.76	85	2.16	3.94	100.1	13046	14596	790	660	785

Authorized stock item. Available from our Customer Service Centers.

Copper or bronze C-L-X and non-jacketed C-L-X are available on special order.

Length Tolerance: Cut lengths of 1000 feet or longer are subject to a tolerance of ± 10%; less than 1000 feet ±15%.

Jackets: Optional jacket types available - consult local sales office.

Aluminum Okopact Conductors

(1) Aluminum Okopact conductors are available on special order. To order aluminum Okopact conductors, change the first three digits of the catalog number from 571 to 521.

Ampacities

(2) Ampacities are in accordance with Table 310.71 of the NEC for an insulated three conductor cable, isolated in air, with a conductor operating temperature of 105°C and an ambient air temperature of 40°C.

(3) Ampacities are in accordance with Table 310.75 of the NEC for a three conductor Type MV-105 or MC cable installed in uncovered cable tray in accordance with Section 392.13 of the NEC with a conductor operating temperature of 105°C and ambient air temperature of 40°C. Where the cable tray is covered for more than six feet with solid unventilated covers, the ampacities shall not be more than 95% of the values shown above.

(4) Ampacities are in accordance with Table 310.83 of the NEC for an insulated three conductor cable directly buried in the earth with a conductor operating temperature of 105°C, ambient earth temperature of 20°C, 100% load factor and thermal resistance (RHO) of 90.

Refer to the NEC, IEEE/ICEA S-135 Power Cable Ampacities, or the Okonite Engineering Data Bulletin for installation in duct banks, other ambient temperatures, circuit configurations or installation requirements.

C-L-X^®The Okonite Company